HOW TO USE

1) Apply to your lenses (please note they must be completely dry) 2) Leave to dry for at least 1 minute 3) Immerse the goggles in water to spread the product Re-apply on average every 1 to 3 sessions, depending on the speed at which fog reappears. 400 applications on average. If your goggles fog up during the session, dip them in the water again, a protective film will reform and allow you to finish your session in good conditions.

PRECAUTIONS

DO NOT USE ON NEW GOGGLES, you may damage the new anti-fog treatment or scratch the lenses. Never touch the inside of the lenses - Do not rub them. If you rub your goggles before applying the product, the product may not work properly. The goggles must be dry before applying the product Replace the marker's cap after use Do not use with contact lenses Must not be used by kids

SAFETY

When used according to our recommendations for use, this product does not pose a risk to the health of users. We have conducted tests through an independent laboratory followed by usage tests with a panel of swimmers to guarantee product compliance. CAREFULLY READ THE INSTRUCTIONS BEFORE USING THE PRODUCT

COMPOSITION OF THE LIQUID

Water: 70-80% Propylene glycol butyl ether: 1-10% 2-(2-butoxyethoxy) ethanol: 1-10% Fluorocaliphatic oxyethylene: 1-10% Potassium Hydroxide: 0-0.5% Magnesium lauryl sulfate: 0 - 0,5%

level of practice	all levels
type of lens	translucid lense, dark smoked lense, clear lense, smoked lense

Anti-fog re-activator for swimming goggles and swimming pool masks

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Usage precautions

Storage

Cleaning